Set up a testing environment with ProxySQL¶

This section describes how to set up Percona XtraDB Cluster in a virtualized testing environment based on ProxySQL. To test the cluster, we will use the sysbench benchmark tool.

It is assumed that each PXC node is installed on Amazon EC2 micro instances running CentOS 7. However, the information in this section should apply if you used another virtualization technology (for example, VirtualBox) with any Linux distribution.

Each of the tree Percona XtraDB Cluster nodes is installed on a separate virtual machine. One more virtual machine has ProxySQL, which redirects requests to the nodes.

Tip

Running ProxySQL on an application server, instead of having it as a dedicated entity, removes the unnecessary extra network roundtrip, because the load balancing layer in Percona XtraDB Cluster scales well with application servers.

Install Percona XtraDB Cluster on three cluster nodes, as described in Configuring Percona XtraDB Cluster on CentOS.
On the client node, install ProxySQL and sysbench:
```
$ yum -y install proxysql2 sysbench
```

When all cluster nodes are started, configure ProxySQL using the admin interface.

Tip

To connect to the ProxySQL admin interface, you need a mysql client. You can either connect to the admin interface from Percona XtraDB Cluster nodes that already have the mysql client installed (Node 1, Node 2, Node 3) or install the client on Node 4 and connect locally.

To connect to the admin interface, use the credentials, host name and port specified in the global variables.

Warning

Do not use default credentials in production!

The following example shows how to connect to the ProxySQL admin interface with default credentials (assuming that ProxySQL IP is 192.168.70.74):

root@proxysql:~# mysql -u admin -padmin -h 127.0.0.1 -P 6032

Expected output

Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.5.30 (ProxySQL Admin Module)

Copyright (c) 2009-2020 Percona LLC and/or its affiliates
Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

To see the ProxySQL databases and tables use the SHOW DATABASES and SHOW TABLES commands:

mysql> SHOW DATABASES;

The following output shows the list of the ProxySQL databases:

Expected output

+-----+---------------+-------------------------------------+
| seq | name          | file                                |
+-----+---------------+-------------------------------------+
| 0   | main          |                                     |
| 2   | disk          | /var/lib/proxysql/proxysql.db       |
| 3   | stats         |                                     |
| 4   | monitor       |                                     |
| 5   | stats_monitor | /var/lib/proxysql/proxysql_stats.db |
+-----+---------------+-------------------------------------+
5 rows in set (0.00 sec)

mysql> SHOW TABLES;

The following output shows the list of tables:

Expected output

+----------------------------------------------------+
| tables                                             |
+----------------------------------------------------+
| global_variables                                   |
| mysql_aws_aurora_hostgroups                        |
| mysql_collations                                   |
| mysql_firewall_whitelist_rules                     |
| mysql_firewall_whitelist_sqli_fingerprints         |
| mysql_firewall_whitelist_users                     |
| mysql_galera_hostgroups                            |
| mysql_group_replication_hostgroups                 |
| mysql_query_rules                                  |
| mysql_query_rules_fast_routing                     |
| mysql_replication_hostgroups                       |
| mysql_servers                                      |
| mysql_users                                        |
| proxysql_servers                                   |
| restapi_routes                                     |
| runtime_checksums_values                           |
| runtime_global_variables                           |
| runtime_mysql_aws_aurora_hostgroups                |
| runtime_mysql_firewall_whitelist_rules             |
| runtime_mysql_firewall_whitelist_sqli_fingerprints |
| runtime_mysql_firewall_whitelist_users             |
| runtime_mysql_galera_hostgroups                    |
| runtime_mysql_group_replication_hostgroups         |
| runtime_mysql_query_rules                          |
| runtime_mysql_query_rules_fast_routing             |
| runtime_mysql_replication_hostgroups               |
| runtime_mysql_servers                              |
| runtime_mysql_users                                |
| runtime_proxysql_servers                           |
| runtime_restapi_routes                             |
| runtime_scheduler                                  |
| scheduler                                          |
+----------------------------------------------------+
32 rows in set (0.00 sec)

For more information about admin databases and tables, see Admin Tables

Note

ProxySQL has 3 areas where the configuration can reside:

MEMORY (your current working place)
RUNTIME (the production settings)
DISK (durable configuration, saved inside an SQLITE database)

When you change a parameter, you change it in MEMORY area. That is done by design to allow you to test the changes before pushing to production (RUNTIME), or saving them to disk.

Adding cluster nodes to ProxySQL¶

To configure the backend Percona XtraDB Cluster nodes in ProxySQL, insert corresponding records into the mysql_servers table.

INSERT INTO mysql_servers (hostname,hostgroup_id,port,weight) VALUES ('192.168.70.71',10,3306,1000);
INSERT INTO mysql_servers (hostname,hostgroup_id,port,weight) VALUES ('192.168.70.72',10,3306,1000);
INSERT INTO mysql_servers (hostname,hostgroup_id,port,weight) VALUES ('192.168.70.73',10,3306,1000);

ProxySQL v2.0 supports PXC natlively. It uses the concept of hostgroups (see the value of hostgroup_id in the mysql_servers table) to group cluster nodes to balance the load in a cluster by routing different types of traffic to different groups.

This information is stored in the [runtime_]mysql_galera_hostgroups table.

Columns of the [runtime_]mysql_galera_hostgroups table

Column name	Description
writer_hostgroup:	The ID of the hostgroup that refers to the WRITER node
backup_writer_hostgroup	The ID of the hostgroup that contains candidate WRITER servers
reader_hostgroup	The ID of the hostgroup that contains candidate READER servers
offline_hostgroup	The ID of the hostgroup that will eventually contain the WRITER node that will be put OFFLINE
active	`1` (Yes) to inidicate that this configuration should be used; `0` (No) - otherwise
max_writers	The maximum number of WRITER nodes that must operate simultaneously. For most cases, a reasonable value is `1`. The value in this column may not exceed the total number of nodes.
writer_is_also_reader	`1` (Yes) to keep the given node in both `reader_hostgroup` and `writer_hostgroup`. `0` (No) to remove the given node from `reader_hostgroup` if it already belongs to `writer_hostgroup`.
max_transactions_behind	As soon as the value of :variable:`wsrep_local_recv_queue` exceeds the number stored in this column the given node is set to `OFFLINE`. Set the value carefully based on the behaviour of the node.
comment	Helpful extra information about the given node

Make sure that the variable mysql-server_version refers to the correct version. For Percona XtraDB Cluster 8.0, set it to 8.0 accordingly:

mysql> UPDATE GLOBAL_VARIABLES
SET variable_value='8.0'
WHERE variable_name='mysql-server_version';

mysql> LOAD MYSQL SERVERS TO RUNTIME;
mysql> SAVE MYSQL SERVERS TO DISK;

ProxySQL failover behavior¶

Notice that all servers were inserted into the mysql_servers table with the READER hostgroup set to 10 (see the value of the hostgroup_id column):

mysql> SELECT * FROM mysql_servers;

Expected output

+--------------+---------------+------+--------+     +---------+
| hostgroup_id | hostname      | port | weight | ... | comment |
+--------------+---------------+------+--------+     +---------+
| 10           | 192.168.70.71 | 3306 | 1000   |     |         |
| 10           | 192.168.70.72 | 3306 | 1000   |     |         |
| 10           | 192.168.70.73 | 3306 | 1000   |     |         |
+--------------+---------------+------+--------+     +---------+
3 rows in set (0.00 sec)

This configuration implies that ProxySQL elects the writer automatically. If the elected writer goes offline, ProxySQL assigns another (failover). You might tweak this mechanism by assigning a higher weight to a selected node. ProxySQL directs all write requests to this node. However, it also becomes the mostly utilized node for reading requests. In case of a failback (a node is put back online), the node with the highest weight is automatically elected for write requests.

Creating a ProxySQL monitoring user¶

To enable monitoring of Percona XtraDB Cluster nodes in ProxySQL, create a user with USAGE privilege on any node in the cluster and configure the user in ProxySQL.

The following example shows how to add a monitoring user on Node 2 if you are using the deprecated mysql_native_password authentication method:

mysql> CREATE USER 'proxysql'@'%' IDENTIFIED WITH mysql_native_password BY 'ProxySQLPa55';

The following example adds a monitoring user on Node 2 if you are using the caching_sha2_password authentication method:

mysql> CREATE USER 'proxysql'@'%' \
        IDENTIFIED WITH caching_sha2_password \
        BY 'ProxySQLPa55';

For either authentication method, run the following command to give the user account named ‘proxysql’ permission to connect to any database and perform basic actions like checking if the database is read-only. This privilege is often used for tools that need to monitor or interact with a MySQL server.

mysql> GRANT USAGE ON *.* TO 'proxysql'@'%';

The following example shows how to configure this user on the ProxySQL node:

mysql> UPDATE global_variables SET variable_value='proxysql'
WHERE variable_name='mysql-monitor_username';

mysql> UPDATE global_variables SET variable_value='ProxySQLPa55'
WHERE variable_name='mysql-monitor_password';

Saving and loading the configuration¶

To load this configuration at runtime, issue the LOAD command. To save these changes to disk (ensuring that they persist after ProxySQL shuts down), issue the SAVE command.

mysql> LOAD MYSQL VARIABLES TO RUNTIME;
mysql> SAVE MYSQL VARIABLES TO DISK;

To ensure that monitoring is enabled, check the monitoring logs:

mysql> SELECT * FROM monitor.mysql_server_connect_log ORDER BY time_start_us DESC LIMIT 6;

Expected output

+---------------+------+------------------+----------------------+---------------+
| hostname      | port | time_start_us    | connect_success_time | connect_error |
+---------------+------+------------------+----------------------+---------------+
| 192.168.70.71 | 3306 | 1469635762434625 | 1695                 | NULL          |
| 192.168.70.72 | 3306 | 1469635762434625 | 1779                 | NULL          |
| 192.168.70.73 | 3306 | 1469635762434625 | 1627                 | NULL          |
| 192.168.70.71 | 3306 | 1469635642434517 | 1557                 | NULL          |
| 192.168.70.72 | 3306 | 1469635642434517 | 2737                 | NULL          |
| 192.168.70.73 | 3306 | 1469635642434517 | 1447                 | NULL          |
+---------------+------+------------------+----------------------+---------------+
6 rows in set (0.00 sec)

mysql> SELECT * FROM monitor.mysql_server_ping_log ORDER BY time_start_us DESC LIMIT 6;

Expected output

+---------------+------+------------------+-------------------+------------+
| hostname      | port | time_start_us    | ping_success_time | ping_error |
+---------------+------+------------------+-------------------+------------+
| 192.168.70.71 | 3306 | 1469635762416190 | 948               | NULL       |
| 192.168.70.72 | 3306 | 1469635762416190 | 803               | NULL       |
| 192.168.70.73 | 3306 | 1469635762416190 | 711               | NULL       |
| 192.168.70.71 | 3306 | 1469635702416062 | 783               | NULL       |
| 192.168.70.72 | 3306 | 1469635702416062 | 631               | NULL       |
| 192.168.70.73 | 3306 | 1469635702416062 | 542               | NULL       |
+---------------+------+------------------+-------------------+------------+
6 rows in set (0.00 sec)

The previous examples show that ProxySQL is able to connect and ping the nodes you added.

To enable monitoring of these nodes, load them at runtime:

mysql> LOAD MYSQL SERVERS TO RUNTIME;

Creating ProxySQL Client User¶

ProxySQL must have users that can access backend nodes to manage connections.

To add a user, insert credentials into mysql_users table:

mysql> INSERT INTO mysql_users (username,password) VALUES ('appuser','$3kRetp@$sW0rd');

The example of the output is the following:

Expected output

Query OK, 1 row affected (0.00 sec)

Note

ProxySQL currently doesn’t encrypt passwords.

Testing the cluster with the sysbench benchmark tool¶

After you set up Percona XtraDB Cluster in your testing environment, you can test it using the sysbench benchmarking tool.

Create a database (sysbenchdb in this example; you can use a different name):
```
mysql> CREATE DATABASE sysbenchdb;
```
The following output confirms that a new database has been created:
Expected output
```
Query OK, 1 row affected (0.01 sec)
```
Populate the table with data for the benchmark. Note that you should pass the database you have created as the value of the --mysql-db parameter, and the name of the user who has full access to this database as the value of the --mysql-user parameter:
```
$ sysbench /usr/share/sysbench/oltp_insert.lua --mysql-db=sysbenchdb \
--mysql-host=127.0.0.1 --mysql-port=6033 --mysql-user=appuser \
--mysql-password=$3kRetp@$sW0rd --db-driver=mysql --threads=10 --tables=10 \
--table-size=1000 prepare
```

Run the benchmark on port 6033:

$ sysbench /usr/share/sysbench/oltp_read_write.lua --mysql-db=sysbenchdb \
--mysql-host=127.0.0.1 --mysql-port=6033 --mysql-user=appuser \
--mysql-password=$3kRetp@$sW0rd --db-driver=mysql --threads=10 --tables=10 \
--skip-trx=true --table-size=1000 --time=100 --report-interval=10 run

Related sections and additional reading

Get expert help¶

If you need assistance, visit the community forum for comprehensive and free database knowledge, or contact our Percona Database Experts for professional support and services.

Community Forum Get a Percona Expert

Last update: 2024-08-30